|
|
| 49500 |
Permatex® Dielectric Tune-Up Grease 3oz |
Protects electrical connections and wiring from salt,
dirt and corrosion. Extends the life of bulb sockets. Prevents voltage
leakage around any electrical connection. Also prevents spark plugs from
fusing to boots. Required for modern high energy ignition systems.
Suggested Applications: electrical connections, spark plug boots, light bulbs, electrical control modules, trailer hitches, battery terminals
|
 |
| 49501 |
Permatex® Bulb/Lamp & Electrical Connector Dielectric Grease
.10oz |
Increases performance and extends service life of bulbs and lamps by preventing voltage leakage and protecting electrical connections from moisture, dirt and corrosion. Great lubricating properties ease the disassembly process. Protects rubber, plastic, ceramic and metal surfaces. Suggested Applications: Headlamps, lighting bulbs for: instrument panel, glove compartment, inside door trim, interior courtesy lamps, parking and turn signals, brake lights, license plate lights, trunk and hood lamps; also for fuses, battery terminals, ignition components and other electrical connections
|
 Click picture to enlarge |
| 49504 |
Permatex® Thread Sealant with PTFE 1oz |
Economical general-purpose fitting sealant.
Outperforms tapes and pipe dopes. Seals and resists pressure in air,
oil, diesel fuel and hydraulic systems. Remains pliable at higher and
lower temperatures. Temperature range -65°F to 300°F (-54°C to 149°C);
resists common shop fluids. Suggested Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings |
 |
| 49505 |
Permatex® Ultra Copper® Maximum Temperature RTV Silicone Gasket Maker 3oz |
OEM specified. Highest operating temperatures for
4-cylinder, turbocharged or high-performance engines. The most advanced,
high temp RTV silicone gasket available. Sensor-safe, low odor,
noncorrosive. Superior adhesion. Three times more oil resistant than
conventional silicones; eight times more flexible than cut gaskets.
Temperature range -75°F to 700°F (-59°C to 371°C) intermittent; resists
auto and shop fluids and vibration. Suggested Applications: Exhaust manifolds/ headers, valve covers, oil pans, timing covers, water pumps, thermostat housings |
 |
| 49510 |
Permatex® Threadlocker PURPLE Low Strength 6ml |
OEM specified. Low strength threadlocker designed for fasteners under 1/4" (6mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Noncorrosive. Conforms to ASTM D 5363 AN0311 (Mil-S-46163A, Type II, Grade M). Suggested Applications: Carburetors, relay locks, headlamps, throttle body assembly, body panel mounting fasteners, fine threads
|
|
| 49512 |
Permatex® Threadlocker RED High Temperature 6ml |
OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents bolts and press fits 3/8" to 1" (10mm to 25mm) from loosening due to shock, severe vibration and heat stress. Exclusive formulation for newer engines and high performance applications that require extreme temperature resistance. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools. Suggested Applications: Camshaft sprocket bolts, crankshaft bolts, idler bearings, press fit filler tubes, transmission input and output shaft threads, ring gear or shock bolts
|
|
| 49514 |
Permatex® Threadlocker BLUE Medium Strength 6ml |
OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs
|
|
| 49516 |
Permatex® Threadlocker GREEN Penetrating Grade 6ml |
OEM specified. A low viscosity threadlocking liquid
that wicks along the threads of preassembled fasteners to secure them in
place. Since it is applied after assembly, preventive maintenance
procedures are simplified. Ideal for fasteners ranging from #2 to 1/2"
(2.2 to 12mm) in size. Localized heating and hand tools are needed for
disassembly. Suggested Applications: Bolts on alternators, air conditioning belts and distributor clamps, carburetor adjustment screws, hairline cracks |
|
| 49520 |
Permatex®Silicone Adhesive Sealant RTV Clear 3oz Tube |
General-purpose, clear RTV indoor/outdoor sealant.
Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric,
vinyl, weather stripping and vinyl tops. Protects and repairs electrical
wiring. May be applied to horizontal or vertical surfaces. Waterproof
and flexible. Temperature range -75°F to 400°F (-59°C to 204°C); resists
oil, water, weather, vibration, grease. Suggested Applications: Windshields, door frames, electrical connections, vinyl tops, seams and roofs |
Also available in 7.25 oz PowerBead
|
| 49540 |
Permatex®Silicone Adhesive Sealant RTV Clear "Powerbead Can" |
||
| 49521 |
Permatex® Ultra Black® Maximum Oil Resistance RTV Silicone Gasket Maker 3.25 oz |
OEM specified. For dealership warranty requirements,
ensures extended drivetrain warranty compliance. Fast-curing formula.
Sensor safe, low odor, noncorrosive. Meets performance specs of OE
silicone gaskets. Retains high flexibility, oil resistance properties
through use of a patented adhesion system. Temperature range -65ºF to
500ºF (-54°C to 260°C) intermittent; resists auto and shop fluids and
vibration. Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, transmission pans |
 |
| 49525 |
Permatex®
Anti-Seize Lubricant 1oz |
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Temperature range: -60°F to 1600°F (-51°Cto 871°C). Salt, corrosion and moisture resistant – ideal for marine use. Non-aerosol version meets Mil Spec #907E. Aerosol - Level 3*
|
Click picture to enlarge |
| 49526 |
Permatex® Ultra Slick™ Engine Assembly Lube 4oz |
Proper lubrication of metal mating surfaces is
essential prior to starting a new or rebuilt engine. Ultra Slick™
adheres to component surfaces to prevent scuffing and galling during
initial start-up. This high quality formulation meets or exceeds OEM
performance specs for engine assembly lubricants. Suggested Applications: Engine bearings, camshafts, lifters, valves, guides and rocker shaft assemblies
|
|
| 49527 |
Permatex® Hylomar® Universal Blue Racing Formula Gasket Dressing & Flange Sealant Hylomar® 1.2oz
|
Adopted worldwide by many automotive manufacturers
and countless race teams for sealing gas and diesel engines and
transmissions. This non-chlorinated gasketing and sealing compound has been specially formulated to be non-setting and non-hardening at elevated temperatures. It withstands rapid changes in temperature and remains flexible and tacky even at high temperatures, allowing repeated disassembly and reassembly in high performance applications. This no-run formula seals surface imperfections on machined flanges and is vibration resistant. Temperature range of -60°F to +500°F (-50°C to +260°C); resists engine fluids, including water, coolant, gasoline, lubricating oils, kerosene and some refrigerants. Also possesses dust and moisture proofing properties. Suggested Applications: Thermostat housings, differential coverings, hydraulic drives and motors, gearbox assemblies, intake manifold assemblies, oil, fuel and water pump housings and seals, fuel injectors and fuel pumps, transmission and torque converter seals |
|
| 49530 | Permatex® High Temperature Sleeve Retainer |
OEM specified. High temperature (up to 400ºF / 204ºC)
anaerobic adhesive that secures slip and press fit assemblies. Adds up
to 3,000 PSI holding power. Restores fit to worn or out-of-tolerance
assemblies. Prevents surface corrosion. Suggested Applications: Cylinder sleeves, valve guides, valve seats, bearings and bushings, woodruff keys, liner assemblies |
 |
| 49544 |
Permatex® Disc Brake Quiet 12oz |
Stops brake squeal by dampening vibration at
caliper/brake pad interface. Provides tighter fit and allows for easier
disassembly. Protects against corrosion. Compatible with anti-lock brake
systems. This product contains an elastomeric polymer for use with brake
pads not having anti-squeal shims. Aerosol – Level 3* Suggested Applications: Automotive disc brakes, outboard and inboard pads for disc braking systems, disc brake pads without anti-squeal shims |
|
| 49546 |
Permatex® Brake & Parts Cleaner Non-Chlorinated 20oz |
Penetrates, dissolves and removes dirt and oil from
brake systems and metal parts. Safer for aluminum. Leaves no
contaminant-attracting residue or chlorinated solvent run-off. Helps
manage EPA halide limits. Level 3* Suggested Applications: All brake systems, C.V. joints, machinery, tools, farm equipment |
|
