|
|
| The Leader in Engine Control Technology - Because Second Place is the First Loser! |
| Twin Tuner Fuel Injection Controller for 2001-2007 Twin-Cam 88/96 |
| TEC # | Description | |
| 34253 |
The Twin Tuner allows you to
easily adjust your fuel injection to match the requirements of
performance parts including camshafts, free flowing exhausts, and low
restriction air filters. You can add or subtract fuel. Installation only
takes 10-15 minutes and is very easy, with no splicing, cutting,
crimping, or bulky interconnections.
You can use the mode and up/down pushbutton switches to make fuel trim adjustments in the RPM and throttle position ranges required by most applications. The fuel trim value is displayed on a bright daylight readable LED display. Very Economical |
 |
| 34252 | USB interface for Twin Tuner. Allows you to program data through your computer |
 |
 |
 |
|
| TEC | Description | |
| 34250 |
2007 TWIN SCAN II Tool Allows operator to read and clear diagnostic trouble codes from the ECM, TSM/TSSM, Speedo and Tach. Works with Delphi Fuel Injection 2001-2007 and 2003-2006 Carbureted Models. Includes USB Cable for use with laptop or desk top computer with USB port. |
|
| Daytona Twin Tec Ignitions For TWIN CAMS |
| Single "Plug In" Ignition Carbureted |
|
|||
|
* Fits Late 2003-2007 Twin Cam * Fits Late 2003-2005 Sportster's |
 |
|||
| A single TC88A part number provides coverage for all 2003 and later H-D® carbureted models using the new 12 pin ignition module. The TC88A is constructed with a low profile machined billet aluminum housing. Works with ALL HD Alarms! | ||||
|
(TEC # 34215) |
click picture to enlarge |
| Daytona Twin Tec Ignitions | ||||
| Dual "Plug In" Ignition Carbureted | ||||
| * Fits Late 1999-2003 Twin Cam | ||||
| Five rotary switches are used to set the operating modes, adjust the initial timing and timing advance, and select the RPM limit. |
 |
|||
|
(TEC # 34205) |
click picture to enlarge |
| Daytona Twin Tec Ignitions For SINGLE CAMS |
| Two advance curve families with adjustable advance slope accommodate stock to highly modified engines. Digitally set RPM limit (100 RPM steps) Selectable single or dual fire mode. Selectable multi-spark mode for quick starting and smooth cruise. Optional PC Link cable and software for programming custom advance curve |
| TEC # |
Description |
|
| 34200 | Adjustable
Ignition DTT# 1005 * Fits in Nose Cone * For Big Twin 1970-99 * For Sportster 1971-97 |
|
| 34202 | Same as above for Kick Start DTT# 1005K | |
| 34211 | * Fits in
Nose Cone * For Sportster 1998 and Later * Plugs directly into harness DTT# 1005S |
|
| 34203 | Adj. Ignition External
"Plug-in" * For Big Twin 1990-94 * For Sportster 1990-93 * 7 pin Cannon DTT#1006 |
 |
| 34204 | Adj. Ignition External
"Plug-in" * For Big Twin 1995-98 * For Sportster 1994-97 * 8 pin Deutsch plug DTT#1007 |
| Look at the size of the coil! |
| Daytona Twin Tec Mini Coil Kit |
  |
|
| TEC # | Fits/Replaces |
| 34255 | Daytona Twin Tec's Mini coil kit Includes two (2) 3ohm single fire mini coils along with spark plug wires and extra connectors. Fits 1970-99 |
| 34256 |
Daytona Twin Tec's Mini Coil Sold each |
|
Daytona Twin Tec
Single Fire Coils |
 |
| Tec #34207 Fits: Twin Cam | |
| Tec #34208 Fits: Shovel & Evo |
 |
|
||||
|
Programmable Ignitions for American Iron Horse Motorcycle's |
 |
||||
| TEC # | |||||
| 34217 |
Fit 1999-2003
AIH models with camshaft sensor plate.
Nose Cone Ignition Kit includes Ignition, VOES switch, and two Daytona Twin Tec 3 ohm mini coils. |
||||
| 34218 |
Fit 2004-2006
AIH with crankshaft position sensor and MAP sensor. Plug in Ignition is compatible with OE crankshaft position and MAP sensor and coils |
click picture to enlarge | |||
|
See Bottom of page for TEC Exclusive |
|
Programmable 2 Stage Rev Limiter for drag racing applications! |
| #34201 | Twin
Tec Cable and Software
|
|
| * Allows
uploading custom advance curves * PC Link Interface cable for above Ignitions DTT#1005C |
| #34209 | Bench Top Power Supply |
|
| Evolution/Shovel/Sportster |
| Daytona Twin
Tec Fuel Injection Kits *For 2001 and up Twin Cam 88 with Delphi |
| Twin Tec Fuel Injection Kit with LCD |
 |
| *Includes TCFI plug-in Fuel injection controller, PC link interface cable, WEGO wide-band Exhaust Gas Oxygen Sensor Interface with LCD Screen , 36531-PHM-A01 Wide-band Exhaust Gas Oxygen Sensor and Weld nut. | |
| Tec # 34244 |
| Twin Tec Fuel Injection Kit |
 |
|
*Includes TCFI plug-in Fuel injection controller, PC link interface
cable, WEGO wide-band Exhaust Gas Oxygen
Sensor Interface , 36531-PHM-A01Wide-band Exhaust Gas Oxygen Sensor and
Weld nut for exhaust pipe. Fits 2001-2007 |
|
| Tec # 34245 |
| LCD Wide-band
Exhaust Gas Oxygen Sensor Interface * For Fuel Injected Systems or general engine tuning |
 |
| Tec # 34238 |
| Non LCD Wide-band
Exhaust Gas Oxygen Sensor Interface * For TCFI Fuel Injection
|
 |
| Tec # 34237 |
Wide-band Exhaust Gas Oxygen Sensor Kit * Includes sensor and weld nut for pipe.
|
 |
||
| Tec #34239 | Wide-band Exhaust Gas Oxygen Sensor Kit | ||
| Tec #34241 | Weld Nut for Exhaust Pipe |
 |
 |
| Tec #34242 | Plug for Weld Nut 18 x 1.5mm | ||
|
Twin Tec PC Link Interface Cable TCFI-C * For TCFI Fuel Injection
|
|
| Tec #34236 |
|
Twin Tec TCFI Power
Adaptor TCFI-ADAPT * For Bench Top Programming * 12 Volt Power Supply
|
 |
| Tec #34240 |
| Exclusively sold by TEC Distributing. |
| Developed for Drag Racing applications. |
| Programmable Ignition with "2 Stage Rev Limiter" Software included. |
| Call TEC For More Details! |
| 34220 Fits: 1970+ Nose
Cone 34222 Fits: 1999+ Twin Cam 34227 Fits: 1990+ Plug In 7 Pin Cannon plug 34228 Fits: 1994+ Plug In 8 Pin Deutsch plug |
