Big Twin- Basket Only- 2007-16 Big Twins/2006 Dyna

Big Twin- Basket Only- 2007-16 Big Twins/2006 Dyna

Big Twin- Basket Only- HD 6 Speeds

The Scorpion clutch basket is the highest quality, most durable and cost effective replacement for your broken stock basket. Precision machined from 2024-T3 billet aluminum and hard anodized, this basket is superior in quality and durability to the stock basket. Simply remove your stock ring gear/primary gear and bolt on the new Scorpion basket. All hardware and instructions are included.

Note: Bearing NOT included. Allows for Re-use of stock bearing or purchase new.

TEC # Description BTE #
97591  Clutch Basket Only fits  2007-2016 Big Twin HD 6 Speeds & 2006 Dyna 321-30-02012
 

Barnett Clutches and Cables

Harley Davidson Big Twin

2013-2016

Screamin' Eagle / CVO Models

Consists of 9 Kevlar friction plates,

8 steel plates and a set of 3 heavy duty springs

 

 
TEC # Description BTE #
97577 2013-2016 Big Twin Screamin' Eagle/ CVO Models 303-30-10043
 
Barnett Scorpion Clutch Kits
Barnett Scorpion™ Billet Clutch features over two times as much friction surface area compared to stock clutch. In addition to the 6 heavy duty spring coils included, these kits come with a second set of springs with a different spring rate to allow for tunability...go Mild to Wild without the removal of the primary cover.
  Barnett Scorpion Clutch Kits fit Big Twin  
TEC # Description Scorpion Kit #
97631 Scorpion Clutch Kit fits '06 Dyna & '07 up  Big Twin 608-30-10009
97630 Scorpion Clutch Kit fits Big Twin 1998-06  (except 06 Dyna) 608-30-10098
97628 Scorpion Hydraulic Clutch Kit fits Big Twin 1998-06  (except 06 Dyna) 608-30-30099
97676 Repl. Clutch Pack 1998 + 204043
97620 Scorpion Clutch Kit fits Big Twin 1990 to 1997 608-30-10090
97622 Repl. Clutch Pack '90-97 306-32-40143
97610 Scorpion Clutch Kit fits Big Twin 1986 to 1989 608-30-10086
97672 Repl. Clutch Pack '86-89 306-32-40343
97600 Scorpion Clutch Kit fits Big Twin 1936 to Early ‘84 608-30-10036
97670 Repl. Clutch Pack '36-E84 306-32-40243
 
  Barnett Scorpion Clutch Kits fit Sportsters  
97660

Scorpion Clutch Kit fits XL 5-Speed 883/1200 1991 & Later

607-30-10091
97684 Repl. Clutch Pack XL 5-Speed 306-32-40543
97650

Scorpion Clutch Kit fits XL 4-Speed 883/1100/1200 '84 to ‘90

607-30-10084
97682 Repl. Clutch Pack XL 4-Speed 306-32-40543
97640 Scorpion Clutch Kit XL Ironhead 1000cc 1971 to ‘83 607-30-10084
97680 Repl. Clutch Pack XL 1971 to ‘83 306-32-40743
     
 
 
  Barnett Clutch Kits fit Big Twin 1998 up  
TEC # Description Barnett  #
97470  Kevlar Friction Kit 9 Friction Plates  
97469 Carbon Fiber Friction Kit 9 Friction Plates  
97471 Steel Drive Plates (8 Required)   
97465 Clutch Spring Diaphragm Standard  
97466 Clutch Spring Diaphragm Heavy Duty  
     
97472  Kevlar Extra Plate Clutch Kit  (10 Steels & 9 Frictions)  
97481  Carbon Fiber  Extra Plate Clutch Kit  (10 Steels & 9 Frictions)  
 
  Barnett Clutch Kits fit Big Twin 1990-97  
TEC # Description Barnett  #
97454  Kevlar Friction Kit 8 Friction Plates  
97468 Carbon Fiber Friction Kit 8 Friction Plates  
97491 Steel Drive Plates (6 Required)   
97492 Clutch Spring Diaphragm Standard  
97495 Clutch Spring Diaphragm Heavy Duty  
     
97458  Kevlar Extra Plate Clutch Kit  (10 Steels & 9 Frictions)  
97473  Carbon Fiber  Extra Plate Clutch Kit  (10 Steels & 9 Frictions)  
 
  Barnett Clutch Kits fit Big Twin 1984-91  
TEC # Description Barnett  #
97457  Kevlar Friction Kit 6 Friction Plates  
97467 Carbon Fiber Friction Kit 6 Friction Plates  
97507 Steel Drive Plates (7 Required)   
97494 Clutch Spring Diaphragm Standard  
97534 Adjuster Plate Heavy Duty  
97482  Clutch Spring Conversion  
 
 
  Barnett Clutch Kits fit Big Twin 1941-84  
TEC # Description Barnett  #
97455  Kevlar Friction Kit 5 Friction Plates  
97474 Carbon Fiber Friction Kit 5 Friction Plates  
97505 Steel Drive Plates   Thru ‘67 (3) required,  Post ‘68 (4) required  
97525 Clutch Spring- Standard Orange  (10)  
97526 Clutch Spring- Standard Blue (10)  
97533 Clutch Spring- Heavy Duty Grey (10)  
97456  Carbon Fiber  Extra Plate Clutch Kit 

Extra plate Kit: Carbon fiber consists of 6 friction plates, steels and a set of heavy duty springs. This kit adds 20% more friction Pre-‘68 models require an extra steel plate. HDP-5EPK

 
 
 
TEC # Barnett Clutch 1991 up Sportster & Buells Barnett #
97454 Kevlar Clutch Kit  8 Friction Plates HDP-11K
97468 Carbon Fiber Kit  8 Friction Plates HDP-11CF
97491 Steel drive plates         (6) required HDP-12
97492 Clutch Spring Diaphragm- Standard (1) required MT-81
97495 Clutch Spring Diaphragm- Heavy Duty (1) required MT-77
97458 Complete Extra Plate Kit: Kevlar, 10 friction plates/9 steels. HDP-11EPK
97473 Compl. X-Plate Kit: Carbon Fibre, 10 friction plates/9 steels. HDP-11EPCF
     
TEC # Barnett Clutch Sportster 1984-90 Barnett #
97453 Kevlar Clutch Kit  7 Friction Plates SK-9K
97477 Carbon Fiber Kit  7 Friction Plates SK-9CF
97522 Steel drive plates         (5) required HDP-12
97464 Clutch Spring Diaphragm- Heavy Duty (1) required MT-78
     
97497

Extra Plate Kit 9 friction plates & 8 steels. Adds 28% more surface area to clutch pack.

SK-9EPK
 
TEC # Barnett Clutch Sportster 1971-84 Barnett #
97453 Kevlar Clutch Kit  8 Friction Plates SK-3K
97476 Carbon Fiber Kit  8 Friction Plates SK-3CF
97520 Outer Drive Plate (8) required SK-8
97517 Sportster drive plate (1) required SK-6
86956 Clutch Spring Heavy Duty (1) required Kibblewhite
97517 Clutch Spacers (used to assist in adjusting Press. plate) SK-3S

     
TEC # Barnett Clutch Sportster Thru 1970 Barnett #
97453 Carbon Fiber clutch kit. Kit contains 7 friction plates bonded to steel core. Perfect kit for all wet or dry applications.  
97511 Drive plate (1) required .047 Steel, key hole slots SK-5
97517 Sportster Backing plate (1) required. Fits models thru '70 SK-7
97527 Clutch Springs  Set of (6)    Standard MT-52
97528 Clutch Springs  Set of (6)   Heavy Duty MT-53-6
     
97450

Extra plate Kit: Carbon fiber consists of 8 friction plates, 1 steel and a set of heavy duty springs. This kit adds 14% more friction

SK-1EPK
     
97485

Sintered Iron friction plates: For the serious racer, the answer for hot strokers. Designed to run dry but if become contaminated with oil, they can be easily cleaned and reused

SK-4
     

*Extra Thick Drive Plates are made of heavy guage steel for use in Drag Bikes in conjuction with sintered plates

97486 .059" Thickness

               SK-5-16

97487 .075" Thickness SK-5-14
97488 .089" Thickness SK-5-13
97489 .119" Thickness SK-5-11

 

Barnett Clutch Kits fit Victory Motorcycles

Victory Clutch Plate Kit- Carbon Fiber /

TEC # Description
97564  Carbon Fiber Kit

10 Friction Plates / 9 Steels/ 1 Spring

Barnett Part# 303-85-20001

 
Barnett Clutch Packs fit Pro Clutch

TEC # Description
33501 Fits:  1936-84 Belt Drives 7 Frictions (6 Tabs) & 8 Steels
33503 Fits:  1936-84 Chain Drives 7 Frictions (6 Tabs) & 8 Steels
33505 Fits:  1984-89 7 Frictions (12 Tabs) & 8 Steels
33507 Fits:  1990-97    9 Frictions (36 Tabs) & 10 Steels
33509 Fits:  1998-15 8 Frictions (12 Tabs) & 9 Steels
33511 Fits:  Classic Brute Models 3 & 4 (7 Frictions & 8 Steels)
 
Barnett Clutch Packs fit BDL

TEC # Description
97555 Fits: BDL Chain Drive Competitor Clutch 1990-97  (7 Frictions & 8 Steels)
97556 Fits: BDL EVO/EVB/Quiet Clutch 1990-97       (7 Frictions & 7 Steels)
97557 Fits: BDL Top Fuel/Super Street 1990-97 (9 Frictions & 11 Steels)