Ironhead Sportster

Pictured is a late style Sportster cam gear kit, lower collars and pushrods made from either steel or aluminum. Steel pushrods are the best choice for stroker motors and drag applications where the greatest strength is needed. For street applications where quiet operation is desired, aluminum pushrods are the recommended choice. Both pushrod kits are made from 7/16 diameter tubing which will not interfere with rod covers. Lower spring collars are similar to late style H/D parts and will provide .060 more spring travel over stock collars. High lift cams are easier to install with these collars.

Ironhead Sportster Pushrods

  

 Ironhead Spring Collars
TEC # Description Andrews TEC #

Description

 Andrews
84276 4 steel pushrods 240040 84287 4 lower spring collars

Lower spring collars are similar to late style H/D parts and will provide .060 more spring travel over stock collars. High lift cams are easier to install with these collars.

 277160
84274 4 aluminum pushrods 240060
 
 
TOURING AND PERFORMANCE CAMS
          Duration Max TDC  
TEC # Part# Year Grind Timing(*) 0.053 0.020 Lift Lift Application
84050 214010 (57-70) P 34/40 254 294 0.400 0.200 4/1 kit; exhaust cams only for use with stock P intakes.  Bolt-in power for all iron head Sportsters with no head work. (Stock P exhaust is .380 lift, 242 deg. duration) 
84051 214014 (71-80) PB+ 43/31 254 298 0.410 0.192
84052 214020 (81-84)  
84053 214025 (84-85)**
 
          Duration Max TDC  
TEC # Part# Year Grind Timing(*) 0.053 0.020 Lift Lift Application
84055 214040 (57-70) PB+ 34/40 254 298 0.410 0.208 Bolt-in replacement cams stock  'P' or 'Q' cams; more power and torque thru RPM range with this great street grind. Stock springs will rev. to 7000 RPM 
84056 214045 (71-80) 43/31 254 298 0.410 0.208
84057 214050 (81-84)  
84058 214055 (84-85)**
 
          Duration Max TDC  
TEC # Part# Year Grind Timing(*) 0.053 0.020 Lift Lift Application
84060 214075 (57-70) Y 35/47 262 310 0.425 0.206 Street 900/1000: Biggest cam available for no headwork installation. Stock springs OK. Great mid-range and upper end power. Needs 9.0 or higher C.R. pistons for best output.  
84061 214080 (71-80) 53/29 262 310 0.425 0.182
84062 214085 (81-84)  
84063 214090 (84-85)**