SPORTSTER PUSHRODS, VALVE SPRINGS and COLLARS

 

 

EV Sportster Adjustable Length Pushrods

    
TEC # Description Andrews TEC #

Description

 Andrews
84270 4 Aluminum Pushrods    '86-90 292020 84283 High Lift Evolution Springs used with titanium spring collars, cam lifts of .550+ can easily be accommodated. Installation does not require machining of heads. 4 inner and 4 outer springs  294150
84272 4 Chrome moly pushrods '86-90 292090
84254 4 Aluminum  pushrods 1991 up 292030

84288

 Titanium Upper Spring Collars will fit all Evolution Sportster engines. They are stronger than stock, +.050" more spring travel, 50% lighter and install with stock keepers. 4 titanium upper spring collars 293110
84255 4 Chrome moly pushrods 1991 up 292085
 
EV Sportster Fixed Length Pushrods
84277 4 Aluminum  pushrods 1991 up 292025
84278 4 Chrome moly pushrods 1991 up 292095
 
SPORTSTER TOURING & HIGH PERFORMANCE CAMS
          Duration Max TDC  
TEC # Part# Year Grind Timing(*) 0.053 0.020 Lift Lift Application
84202 298120 (86-90) V2 22/38 240 290 0.465 0.180 Bolt in cams for stock 883, 1100 or 1200 engines. More duration and lift means extra power thru RPM range. Stock springs and hydraulic lifters recommended. 2000-6000 RPM.
84040 298125 (91-99) N2 46/18 244 290 0.440 0.155
84070 298130 (2K up)**  
 
84204 298140 (86-90) V4 30/46 256 296 0.490 0.216 Street/drags: Stock or modified 883/1100/1200. Slightly higher idle speed but stock springs-hydraulic lifters are recommended. RPM range: 2000-6000.
84041 298145 (91-99) N4 52/24 256 296 0.490 0.189
84271 298150 (2K up)**  
 
84208 298180 (86-90) V8 32/44 256 296 0.490 0.226 Modified 1100-1200, stroked 883’s with stock springs and hydraulic lifters. Same intake cam as N4 but more exhaustcam duration. Great mid-range power: 2000-6500 RPM.
84042 298185 (91-99) N8 56/28 264 302 0.500 0.212
84073 298190 (2K up)**  
 
84206 298160 (86-90) V6 34/50 264 302 0.500 0.241 Modified 1200s to 80 inches and/or high comp. pistons. Stock springs and hydraulic lifters are recommended: RPM range: 2500-6800.
84043 298165 (91-99) N6 56/28 264 302 0.500 0.212
84072 298170 (2K up)**  
 
84209 214210 (86-90) V9 33/53 266 309 0.555 0.240 Med. lift cams for stroked engines from 80-88 inches. Broad torque range to 6000+ RPM with hydraulics. Andrews springs,collars and pushrods required. (1991-up need long pushrods).
84044 214215 (91-99) N9 53/33 266 309 0.555 0.240
84074 214219 (2K up)**  
 
84210 214265 (86-90) BV 35/59 274 316 0.590 0.260 Hi-lift cams for 88+ inches. Andrews pushrods, springs and collars required. BV/NV cams start easy and run strong; 2000-6000+ RPM with hyd. lifters. (1991-up need long pushrods.)
84045 214268 (91-99) NV 59/35 274 316 0.590 0.260
84075 214272 (2K up)**  

(*) Timing listed for .053 lift figures.

(**) Model year 2000-up Sportster engines require a different #2 drive gear than '91-'99 engines.

CAMS FOR DRAGS AND HIGH PERFORMANCE
EVOLUTION SPORTSTER CAMS (Rocker ratio = 1.63)
TEC #     Grind           Springs  
84211 298880 (86-90) V80 32/60 272 306 0.600 0.264 HI-LIFT 600 lift for Sportsters with 10.5+ C.R. and head flow work will pull strong to 6500+ RPM. 61-77 inches.
84046 298885 (91-99) N80 66/30 276 310 0.600 0.260 160 LBS.
 
84212 298830 (86-90) V83 32/64 276 310 0.630 0.267 HI-LIFT For 80 to 96 inch motors with head work and 10.5+compression. Quick ramps for 6500+RPM.
84047 298835 (91-99) N83 70/30 280 314 0.630 0.248 160 LBS.
 
84213 298870 (86-90) V87 32/70 284 318 0.670 0.283 HI-LIFT Still more stuff for 100+ cubic inches. Quick ramp,broad tip design will pull strong to 6500+RPM.
84048 298875 (91-99) N87 76/32 288 322 0.670 0.269 160 LBS.