|
|
Tec Distributing Proudly Offers |
| Prowler Frames and Prowler Transmissions. | |
| Tec Distributing Would like to Thank Norman | |
| and All The Guys @ Sussex Hills Cycles | |
| for pictures of the "Prowler Halfmoon Chopper" Build |
 |
 |
| It all Starts out with a Bare Prowler Halfmoon Chopper Frame and a | |
| Prowler 6 Speed Right Side Transmission purchased from TEC Distributing | |
 |
 |
| The Building Process
Begins. The Motor and Prowler 6 Speed Transmission are fitted to to the
Frame.
As advertised everything is straight and lines up perfectly
|
| The wheels arrive!
Valuable time was saved by using Billet Polished Aluminum Axle Spacers From Doherty Machine. TEC offers 3/4" and 1" Axle Spacer Master Kits and multiple size 4 packs. Save Time and Money! |
 |
| The bike is really
starting to take shape. After all the measurements are taken its time to order the front end. Time to Call TEC Distributing! |
 |
| Spyke Inverted is the
only way to Go on this Beauty!
Within days the New Beefy Inverted Front End arrives to Sussex Hills Cycle. |
|
| Looks Great! |
|
| With a set of temporary Handlebars attached its time to roll....... |
 |
| Notice the detail of the welded brackets and the distinctive points throughout the bike | ||
 |
 |
|
| The Front Fender has
arrived!
Check out the way the curves of the front fender and the frame really fit together. This Bike just Flows!
|
 |
| Another view of the Prowler Half Moon Chopper. Its a great fit between Prowler Frame, Prowler 6 Speed transmission and the 124" motor. With the forward controls in place and the wiring all marked for designation, now we just wait for the tank to arrive.
|
 |
|
The Tank Arrives! Temporary Placement of the gas tank gives a good idea of how this bike will look. |
This is Bruce working his magic at Sussex Hills Cycle.
|
 |
|
Still Wondering what a
Prowler Halfmoon Chopper Looks Like?
Take a look at this! |
 |
| Back from paint and the final assembly is almost completed. Just waiting for the seat. Look closely at the tank, see the eagle? |
 |
| Smooth clean lines. The Spyke front end, Prowler frame and Prowler 6 Speed Transmission were all purchased from TEC Distributing. http://www.TECDIST.com |
 |
| The seat arrives and final assembly is complete. |
 |
 |
 |
D & S Gauges Purchased from TEC Distributing | |
 |
||
|
|
||
|
|
|
If you like what you see.....email
sussexhills@tellurian.net
or Log on http://www.sussexhills.com
|
