| PANTHER DRIVE BELTS | |
|
ULTRA-CORD is a strong
non-aramid tensile member that doesn't stretch or shrink, eliminating
the need for high initial installation tensions to compensate for
tension decay. This puts less strain on bearings, shafts and other drive
components for longer system life. The cord's higher tensile strength
increases horsepower capacity by up to 20 percent. This permits the use
of smaller sprockets allowing for more compact, lower cost drives. |
|
| ULTRA-CORD doesn't absorb moisture, so belts won't shrink and don't require special handling or storage. The cord is more stable in use, too. And as a flexible tensile member, ULTRA-CORD improves the overall flex life of any drive. |
|
| TEC # | Application | Teeth | Width | Replaces |
| 60104 | '97 up Touring | 139T | 1.5" | 40024-97 |
| 60105 | '85+ FLT / FXR | 136T | 1.5" | 40001-85 |
| 60103 | 2000+ Softail | 135T | 1 1/8" | 40307-00 |
| 60106 | 1991-99 Dyna | 133T | 1.5" | 40015-90 |
| 60100 | '86-92 & '94 Softail | 132T | 1.5" | 40023-86 |
| 60102 | 1995-99 Softail | 130T | 1.5" | 40017-94 |
| 60112 | 1991-2003 Sportster | 128T | 1 1/8" | 40022-91 |
| 60101 | '93 Only Softail | 128T | 1.5" | 40012-90 |
| 60108 | All 4 Speed Big Twins | 126T | 1.5" | 40003-79 |
| 60111 | '91-96 XL International | 125T | 1 1/8" | 40038-91 |