Metal Foamet Big Twin Primary Service Kit

Replaces OE# 17361-05

Replaces 25244-99K

2008 Touring Fly By Wire Extensions by Novello

NOW AVAILABLE!

Made in the USA

NEW Power Eagle Starters

Power Eagle Starters are Designed, Engineered and Assembled in the U.S.A.

High strength neodymium (rare earth) magnetic field design with optimal gear reduction provides Heavy Duty Power and Cranking Torque to start High Compression motors.

Strong, welded electrical connections and double insulated solenoids withstand the high vibration of V-Twin engines.

New Electrical Connector Pin & Receptor

by Novello

Tec Stocks 1 Pin to 12 Pin connectors.

Also available 10 pack and 100 Deutsch Pins

NEW Pingel FL Shock Lowering Brackets

This Billet Steel long lasting kit will lower 2002-2008 HD Touring Models 1" leaving adequate room for stock tire to fender clearance and is designed to retain the use of the stock rubber shock boot. Easy to install in approximately 30 minutes with common tools and includes instructions and hardware.

USA Made 10mm Compression Releases

Push In Stainless Caps Now Available In 2 Lengths. Sold in pairs

Click photo to enlarge

New from AUTOLITE.....

XTREME SPORT IRIDIUM Spark Plug

Sold Each

Exhaust Pipe Retaining Ring / Circlip

Pipe to Head.   10pk    Replaces: 65325-83

Intake Manifold Seals for Strokers

Designed for Strokers with Taller Cylinders. Repl. 26995-98

In Stock @ TEC

Conversion Parts Kit

Cam drives on any '99-2006 engine can be updated to new 2006 type roller chains with hydraulic chain tensioners. Instead of super powered spring adjusters, '06 Dyna roller cam chains use engine oil pressure to maintain chain tension. And '06 style conversion camshafts have large journal bearings on the sprocket ends.

All 2007 96 inch engines and 2006 Dyna Glides use roller chain drives instead of silent chains. Cams made for '99-'06 engines will not fit '06 Dyna or '07 Twin 96" engines. 2006 Road Glides, Road Kings, Electra Glides and Softail models still run earlier silent chain drives. Cam grinds listed below are designed for use with stock hydraulic lifters.

FEULING Oil Pumps for '06 Dyna and All 2007 up Big Twins in Stock at TEC

Click photo to enlarge

Black Diamond

Guide & Seal for 7mm Stem Twin Cams

Sealed Beam 4.5" Amber

Auxiliary lamp Spot Light

Unique Design allows both Screw Style and Spade Style connectors

HB 125 Hydraulic Primary Chain Tensioner

Continuously self adjust's while riding

Easy Tool Kit for Mikuni 42/45/48

Includes, Easy 17mm x 11/16 open end wrench, Mini T Jet Wrench, 2.5mm ball end allen bit, & Flathead/Phillips hex bit

Starter Ring Gear Rivet Fixture Tool

This tool is designed to remove the starter ring gear rivets from Big Twin clutch shells to install starter ring gears.

Use on 1990-2006 FL, FXST & 1990-2005 FXR, & FXD.

Twin Cam Timken® Case Bearing Conversion Tool No. 959

This tool is a must for the big cubic inch late model Twin Cam engine builder. It may also be used to replace bearing for stock 88" or 96" engines. Utilizing the special JIMS precision insert, it is designed to easily and accurately convert the left side crankshaft roller bearing (H.D. No.24604-00D) to the more durable Timken Bearing (H.D. No.9028). This insert is manufactured from aluminum that is several times stronger than the aluminum case material the standard bearing rides in. The Tool Includes:

See TOOLS Link in Left Column for more JIMS TOOLS

U.S. Made Torrington Inner Cam Bearing fits 2007 Big Twins & 2006 Dyna models

Click on picture to enlarge

Inner cam bearing fits 2007 Big Twin and 2006 Dyna Models. Replaces oem #9215

For complete listing see TEC Air Filters on left column

Proudly made in the U.S.A

NEW FROM TEC....

Extended Length Chrome Banjo Fitting for Aftermarket Forward Control Master Cylinders.

Click on picture to enlarge

 TEC Distributing stocks the recently redesigned

Perf-form Oil filter for Twin Cams.

Twin Cam

Hylift Johnson Tappets

 MADE IN U.S.A.

These original designed tappets are quiet and designed to last in stock, as well as slightly modified, motors.

Economical replacement tappets are sold in sets of 4.

Click photo to enlarge

Click photo to enlarge

In any Twin Cam 88, in good mechanical condition, the MYSTFREE completely eliminates oil blow-by emitted from the engines breather system, which in most cases ends up on the rider or side of the bike.

See Novello Link in Left Column for Novello Products

Promotes complete combustion via chemical reaction which improves performance, octane levels and mileage.

Reduces engine deposits, fuel oxidation, varnish, gum and bacterial growth in fuels.

For use in 6 gallon tank applications.

Click photo to enlarge

GASKETS FOR LATE MODEL INDIANS

 TEC MADE in the U.S.A.

Click photo to enlarge

Includes Indian Proprietary Primary Cover, Clutch & Inspection Cover  1 ea

Click photo to enlarge