Click Here For KHROME WERKS Handlebar Specifications
|
|
DUAL HEADER ONLY SYSTEM for 1999-2008
HARLEY-DAVIDSON FLHT, FLHX, FLTR AND FLHR models
Use
any Khrome Werks or Any other Bagger Muffler Set!
Update your early Twin Cam bike
and enjoy the late model look. This cleaner looking system reduces heat
transmission to the rider and passenger by routing the exhaust under the
frame instead of under the seat. Upgrade your 2009 model for a lighter
system that offers more flow and makes more top end power than the
factory system. Both systems feature 1¾” 16 gauge mandrel bent,
interconnected headers and 220º full coverage heat shields. Front pipe
crosses over to the left side and is securely mounted to the
transmission oil pan. Crossover pipe is formed obround from 1 7/8”
tubing for increased ground clearance and no cross sectional area loss.
99-08 system crossover is slightly lower than frame cross brace with the
OEM kickstand as the lowest point. Systems features a hidden
inter-connect for maximum top end horsepower, improved low end torque
and sound damping. An independent dual pipe version was tested with less
favorable results. Two 18mm O2 sensor ports and plugs and all mounting
hardware included. Mufflers not included. Use any Khrome Werks or other
bagger muffler set. Made in USA
|
|
|||
| Stock Header / Khrome Werks Slip ons | Khrome Werks Dual Header & Slip ons | Primary Side..No Burning Passenger | ||
 |
 |
 |
||
| TEC # | Description |
Click pictures to enlarge |
||
| 49975 | Dual Header System 1999-2008 |
Mounting Photo with
Stabilizer
|
Lower
Cross Over Photo
|
|
| 49976 |
Dual Header System 2009-2011 |
Installed on S/S 124"
|
Lower Cross Over Photo t |
|
|
Khrome Werks 3.5” HP-PLUS® SLASH DOWN MUFFLERS H-D TOURING 1995-20010 "Slash Down-Lites" (Louder than Regular HP Plus Muffler) |
|
||
| TEC # | Description | KW # | |
| 49978 |
New, Louder high
performance
3.5”
Touring Muffler (Louder than Regular HP Plus Muffler)
This Line of mufflers has been completely redesigned, retaining the great performance and quality sound. The new features are: 16 ga. one-piece shell, upgraded "Lite" baffle design |
202280 | |
|
Khrome Werks 3.50” HP-PLUS® MUFFLERS H-D TOURING 1995-20010 New, high performance 3.50 inch diameter, slip-on, touring absorptive mufflers. Increased horsepower and torque with our distinctive deep, throaty, although quieter, sound. Overall decibel level is reduced while still retaining the high quality, deep sound. Utilizes factory mounting hardware and clamps. Sold in pairs.
|
|
||
| TEC # | Description | KW # | |
| 49980 |
3.50” HP-PLUS® MUFFLERS SLASH CUT/SLANT DOWN Original |
202295 | |
| 49981 |
3.50” HP-PLUS® MUFFLERS SLASH CUT/SLANT BACK |
202290 | |
| 49982 |
3.50” HP-PLUS® MUFFLERS TAPER TIPS |
202285 | |
|
Khrome Werks 3” HP-PLUS® SLASH CUT MUFFLERS H-D TOURING 1995-20010 "Slash Cut Taper-Lites"
|
|
||
| TEC # | Description | KW # | |
| 49990 | New, high performance 3” Touring Lite line of mufflers has been completely redesigned, retaining the great performance and quality sound. The new features are: 16 ga. one-piece shells, upgraded baffle design, bolt and nut baffle installation, and upgraded acoustical wrap materials. | 202252 | |
|
Khrome Werks
3” HP-PLUS® SLASH CUT MUFFLERS |
|
||
| TEC # | Description | KW # | |
| 49985 |
High performance slash cut 3
inch slip-on mufflers for the 2008 Fat Bob model.
HP-Plus® fprovides significant gains in horsepower and torque and exhibits a distinctive, deep throaty sound. Utilizes factory mounting clamps and hardware. Sold in pairs. Made in USA |
202315 | |
|
Khrome Werks Baffles & Power Cones HP Plus Baffles Improve low & mid-range performance of drag pipes and dampen sound. All steel construction Stainless steel Power Cones add Low cost drop-in performance improvement from XL's to Big Twin Evolution & Twin Cam 88's (pair) |
|
||
| TEC # | Description | ||
| 49998 | Power Cones - Sold as pair | ||
| 49995 | Baffle fits 1 3/4" OD Exhaust - Sold as pair |
 |
|
| 49996 | Baffle fits 2" OD Exhaust - Sold as pair | ||
| 49997 | Baffle fits 2 1/4" OD Exhaust - Features 2" HP-Plus baffle welded in a 10" long tube expanded to fit in 16 or 18 gage pipes. Sold as pair | ||
|
NEW from Khrome Werks 1 ¼” FLHX/FLHT Handlebars Now available for 2008 up models with the electronic throttle control sensor unit. 1 ¼” diameter formed handlebars with 1” center mounting section and 1” grip mounts. Made in USA. |
Click picture to enlarge 1 ¼” FLHX/FLHT APE HANGER In Stock @ TEC |
||
| TEC # | Description |
 |
|
| 49883 | 12” FAT APE Fit 2008-2010 FLHX & FLHT Batwing Fairings | 300315 | Click picture to enlarge |
| 49888 | 12” FAT APE Fit 1996-2007 FLHX & FLHT Batwing Fairings | 300310 |
 |
| 49884 | 14” FAT APE Fits 2008-2010 FLHX & FLHT Batwing Fairings | 300317 |
Choice of Cables: Click picture to enlarge |
| 49889 | 14” FAT APE Fits 1996-2007 FLHX & FLHT Batwing Fairings | 300312 |
|
|
Khrome Werks
1 ¼” FAT APE HANGER
HANDLEBARS
1 ¼” diameter formed handlebars with 1” center mounting section and 1” grip mounts. Work with standard controls and grips. Made in USA. |
|
|||
| TEC # | Description |
Click picture to enlarge |
||
| 49881 | 12” FAT APE Fit 2008 ROAD KING® and ROAD GLIDE® models | 300325 |
1 ¼” FAT APE HANGER |
|
| 49882 | 16” FAT APE Fits 2008 ROAD KING® and ROAD GLIDE® models | 300327 | ||
| 49971 | 12” FAT APE Fit 1996-2008 standard throttles | 300320 |
 |
 |
| Click picture to enlarge | Click picture to enlarge | |||
| 49970 | 16” FAT APE Fit 1996-2008 standard throttles | 300322 |
16" Khromewerks
1.25" Handlebars on 2003 Fatboy.. Thanks Steve and the guys at Rock Solid Choppers in Plymouth, Mass for the photo. |
|
|
SEE BOTTOM OF PAGE FOR HANDLEBAR SPECIFICATIONS |
| 1" Sweeper Stretch Handlebars |
|
||
| 1" diameter, 14-gauge steel tubing. Features all new swept back 10" radius rise section. Narrow, wide and special wide versions for FLHT available. Wide version (2 models) fits Softails, Softail Springer's, Dyna Wide Glides, Road Kings. All are Diamond knurled for H-D OEM risers on 3 1/2" centers (4 3/4" for Springer's) to help prevent slippage. With wire dimples. FLST, FLHR and FLHT use all stock cables and brake hose. | |||
| TEC # | Description | KW # | |
| 49961 |
FLHT / FLHX Sweeper Bar
Fits: 08-09 Electronic Throttle |
300512 | |
| 49963 |
FLHT / FLHX Wide
Sweeper Bar +2" Fits: 08-09 Electronic Throttle |
300515 | |
| 49960 |
FLHR / FLTR Sweeper Bar
Fits: 08-09 Electronic Throttle |
300511 | |
| 49962 |
FLHR / FLTR Wide Sweeper Bar
+2" Fits: 08-09 Electronic Throttle |
300514 | |
| 49920 | Narrow Sweeper Bar | 300500 | |
| 49921 | Wide Sweeper Bar | 300501 | |
| 49923 | Wide Sweeper Bar +2" | 300504 | |
| 49922 | Sweeper Bar FLHT / FLHX | 300502 | |
| 1" "Ape Hanger" Custom Handlebars |
|
||
|
1" diameter, 14-gauge steel tubing. Diamond-knurled for OEM risers on 3-1/2" centers (4 1/2" for Springer's) to help prevent slippage. 82-up models feature wire dimples. Coming Soon...1.25" Apes |
|||
| TEC # | Description | KW # | |
| 49890 | Mini-Ape Hanger for FXDWG,10" rise | 300036 | |
| 49891 | Mini-Ape for FXDWG,10" rise, drilled | 300051 | |
| 49896 | Narrow Ape bar, 12" rise 82-up H-D | 300016 | |
| 49894 | Ape Hanger bar, 12" rise pre-82 H-D | 300010A | |
| 49895 | Ape Hanger bar, 12" rise 82-up H-D | 300012 | |
| 49897 | Ape Hanger H-D Springer, 12" rise L88-05 | 300015 |
|
| 49900 | Ape Hanger bar, 16" rise pre-82 H-D | 300011A | |
| 49901 | Ape Hanger bar, 16" rise 82-up H-D |
300013 |
|
| 49902 | Ape Hanger H-D Springer, 16" rise L88-05 | 300018 | |
| 49903 | Ape Hanger bar, 18" rise pre-82 H-D | 300021 | |
| 49904 | Ape Hanger bar, 18" rise 82-up H-D | 300023 | |
| 1-1/4" "Beefy" T- Bars |
|
||
| 1-1/4" diameter section tapers to 1" for standard handlebar controls. Lightweight. Dimpled for wiring. Pre-drilled for internal wiring. Suggested fit: 1982-2005 H-D models (except Springers) and 1982-up models using custom controls. Risers are on 3 1/2" centers | |||
| TEC # | Description | KW # | |
| 49885 | 6" rise, drilled | 300347 | |
| 49886 | 8" rise, drilled | 300349 | |
| 1" T- Bars 27.5" Wide |
|
||
| Lightweight, strong, comfortable. 1" diameter. Late models with wire dimples. Pre-drilled for internal wiring. | |||
| TEC # | Description | KW # | |
| 49932 | Pullback
T-Bar '82 Up 6" rise, drilled |
300087 | |
| 49933 | Pullback
T-Bar '82 Up 8" rise, drilled |
300088 | |
| 1" Stretch T- Bar |
|
||
| This line of Pullback Drag Bars stretches almost 2-1/2" closer to the rider than our standard 1" x 8" Pullback Drag Bar. Controls clear the gas tank on most 1982-up Harley-Davidson models. Bar is manufactured from 1.00" O.D. x 12 gage steel tubing. Risers are 1" O.D. x .120" DOM tubing with 1/2"-13 threaded inserts. Polished and nickel chrome plated. Bars are 27-1/2" wide with 11-1/8" pullback from the triple tree to the end of the grip when the fork angle is 30°. Note: Turn signals must be relocated to the fork legs. Made in U.S.A. | |||
| TEC # | Description | KW # | |
| 49927 | Stretched Drag T-Bar drilled | 300095 | |
| 1" Low Rise T- Bar 27.5" Wide |
|
||
| Lightweight, strong, comfortable. 1" diameter. Late models with wire dimples. Pre-drilled for internal wiring. | |||
| TEC # | Description | KW # | |
| 49928 | Low Rise Stretched T-Bar drilled '82 up | 300130 | |
| 1" Chrome Custom Replacement Handlebars |
|
||
| 1"-diameter, 14-gauge steel tubing. Diamond knurled for OEM risers on 3 1/2" centers (4 1/2" for springers) to help prevent slippage. 82-up models feature wire dimples. | |||
| TEC # | Description | KW # | |
| 49945 | Fits 86-up 883, 83-85 XLS, 87 FXRS &91 FXDB-S Repl. OEM #56082-83. | 300035 | |
| 49948 | Stretch Bad Boy style for 82-up H-D | 300071 |
|
| 49949 | Stretch Bad Boy style for H-D Deuce | 300075 | |
| 49955 | Fits 87-05 FLST Heritage Replaces OEM #56569-86 | 300032 | |
| 49956 | Heritage style for Road King | 300072 | |
| 1" Chrome Glide Handlebars |
|
||
| 1"-diameter, 14-gauge steel tubing. Diamond knurled for OEM risers on 3 1/2" centers (4 1/2" for Springer's) to help prevent slippage. 82-up models feature wire dimples. | |||
| TEC # | Description | KW # | |
| 49938 | Replaces #55933-97 fits 97-03 FLSTS Heritage springer | 300038 | |
| 49939 | 2" Narrow Fatboy w/ dimples, fits 82-up H-D XL,FXD Forks | 300073 | |
| 49940 | Rep. #55919-82 fits 90-00 FLSTF, FLSTN; 82-84 FLH; 94-99 FLHR | 300034 | |
| 49941 | Fatboy-style, 73-81 H-D | 300069 | |
| 1" Chrome Drag Bars |
|
||
| 1" diameter, 14-gauge steel tubing. Diamond-knurled for OEM risers on 3-1/2" centers to help prevent slippage. 82-up models feature wire dimples. | |||
| TEC # | Description | KW # | |
| 49915 | Standard drag bar, fits 82-05 H-D | 300925 | |
| 49916 | Low-rise drag bar, fits 82-05 H-D | 300915 | |
| 1" Chrome Buckhorn Handlebars |
|
||
| 1"-diameter, 14-gauge steel tubing. Diamond knurled for OEM risers on 3 1/2" centers (4 1/2" for springers) to help prevent slippage. 82-up models feature wire dimples. | |||
| TEC # | Description | KW # | |
| 49908 | Repl.OEM #56086-81. Fits 74-81 XL, FX. Buckhorn | 300006A | |
| 49910 | Repl. OEM #56093-88 Fits L88-05 FXSTS Springer | 300033 | |
| 49911 | Hi-Rise Buckhorn Pullback, fit 82-up H-D | 300065 | |
| 49909 | Repl. OEM #56081-82.Fits 82-05 XL, FX, FXR, FXST, FXDB, Buckhorn | 300007A | |
|
1.jpg)
