FLEX-HONE

For Rotors and Flywheels

 

FACT:  The profile of your rotor, not the pad you use, is responsible for brake noise!

 

UTILIZING PATENTED "FLEX-HONE" TECHNOLOGY, THIS PATENTED TOOL PRODUCES
A FACTORY STYLE, OEM CROSS-HATCH FINISH... RIGHT ON YOUR SHOP LATHE!

  • Twenty seconds of forward rotation transfers the recommended OEM circular style, "cross-hatch" pattern needed on brake rotors & flywheels.
  • Specially positioned Aluminum Oxide balls level off the spiral grooves created by brake lathe bits, the prime cause of friction induced brake noise.
  • Removes the ripped, torn and folded metal fragments formed by lathe cutting blades during the surfacing and/or truing process.
  • A net cost of only about .30 per brake rotor... not the typical .75 popular scotch pads and sanding type discs cost.
  • Honing lowers harmonic vibrations created by surface irregularities, thus reducing annoying high pitched squeal & groan after the burnish.
  • Easily produce a true Plateau Finish on the rotor.  Duplicate the professional finish many performance factories do... only without a $300,000 milling machine.
  • Forget changing sandpaper or discs every rotor... the hone lasts for months!
TEC # Description
99625 Course Grit
99626 Medium Grit
99627 Fine Grit