"Time-Saver" Pushrods
Timesaver pushrods eliminate the need to disassemble the top end and remove the rocker arms to change pushrods or camshafts. This is a 75% savings in installation time! 

The Timesaver pushrod is larger in diameter than the original equipment so it is much stronger and will eliminate any valve train “flex”. The single adjuster end can be changed from 9.5” all the way to 11.5”. The single adjuster end is a large 9mm diameter and provides superior strength and durability. 

Kit includes complete set of four pushrods with easy installation instructions.
TEC # Evolution Time Saver Pushrods fits 1984 up. Set of 4 Crane
83382 4-0030
 
 
Evolution Adjustable Aluminum Pushrods

Adjustable pushrods allow the engine builder to set the identical preload for each tappet. Proper tappet preload will prevent tappet noise and tappet “pump up”. 

Our adjustable pushrods are made of aircraft quality steel tubing which are stronger than the original equipment pushrod. Pushrod “flex” can initiate valve train harmonics that reduce power and cause damage to valve springs and tappets. 

Each set of adjustable pushrods contains two exhaust and two intake length pushrods for the correct valve train geometry. This kit requires top end disassembly or camshaft removal to install.
TEC #   Crane
83380 1984 and up Evo® Big-Twin® 4-0018
83381 1984 and up Evo® Big-Twin® with long Stroker cylinders 4-0019
83384 1986-90 Evolution® Sportster® 4-0020
83383 1991 and up Evo® Sportster® using aftermarket collapsible tubes 4-0023
 
83387 Aircraft quality aluminum push rod tubing. 7/16" x .065 wall. "Lightweight" Fits: 1984 and up Evo® Big-Twin® 4-0017