New Page 0

Judge us by the company we keep...

New Items

TEC Distributing is continuously adding "New Products" to the 7000 plus part numbers currently in stock....So Check Back Often!

NEW @ TEC....

VT-i Electronic Ignition for Harley-Davidson V-Twin Engines Except Early Magneto Type and 1999 and Later Twin-Cam

Ultra reliable Dual Fire electronic ignition system for all Harley-Davidson

Includes special trigger rotor for use with traditional mechanical advance mechanism (supplied by customer)

Operates down to below 6 volts for reliable starting under all conditions, including kick start

TEC #

Description

34216

VT-i Electronic Ignition for Harley-Davidson V-Twin Engines Except Early Magneto Type and 1999 and Later Twin-Cam

Click picture to enlarge

NEW @ TEC.... One Wire Alternator for Unreliable Generator Replacement The 40 Amp One Wire Solid State Alternator fits 1958 to 1969 Big Twins and 1959 to 1982 XL series This unit bolt on replacement for the outdated, unreliable generator assembly found on early model bikes. The alternator features solid state components for precise voltage regulation and easy one wire hook up.
TEC #	Description
83076	Fits Big Twin 1958-69 and Sportster 1959-82

NEW @ TEC.... Spyke 4 and 5 Speed Solenoids with Pull Button
TEC #	Description
73643	Fits 1965 up 4 Speed Models
73644	Fits 1980 up 5 Speed Models

New Spring Kits from Kibblewhite Precision Machining Big Twin High Performance Ovate Wire “Beehive Style” Spring Kits For stock to moderate applications		BIG TWIN: 1984 thru 2004 includes: springs, upper and lower collars. BIG TWIN: 2005 thru 2011 includes: springs, upper and lower collars, valve seals.
TEC #	Description
87880	BIG TWIN: 1984 thru 2004 Spring kit for up to .600 valve lift and 165 lbs seat pressure.
87881	BIG TWIN: 1984 thru 2004 Spring kit for up to .630 valve lift and 185 lbs seat pressure.
87882	BIG TWIN: 2005 thru 2011 Spring kit for up to .600 valve lift and 165 lbs seat pressure.
87883	BIG TWIN: 2005 thru 2011 Spring kit for up to .630 valve lift and 185 lbs seat pressure.

TEC Now Offers

Black Stealth Handlebar Packages!

Includes Khromeworks USA Made Black Handlebars.

Barnett Black Stealth Throttle, Idle and Clutch Cables

Russell "Black Out" Brake Hoses

Packages Available for All HD Models

TEC Now Offers

"Classic Black" Handlebar Packages!

Includes Khromeworks USA Made Black Handlebars.

Barnett Black and Chrome Throttle, Idle and Clutch Cables

Black and Chrome Brake Hoses

Packages Available for All HD Models

TEC now has K&N Filters for 110 CVO Models

TEC #

Description

73544

Harley Davidson^® motorcycles when equipped with the Screamin' Eagle^® Ventilator performance system:

2011 HARLEY DAVIDSON FLTRUSE CVO ROAD GLIDE ULTRA
2011 HARLEY DAVIDSON FLSTSE CVO SOFTAIL CONVERTIBLE
2011 HARLEY DAVIDSON FLHXSE CVO STREET GLIDE
2011 HARLEY DAVIDSON FLHTCUSE CVO ULTRA CLASSIC ELECTRA GLIDE
2010 HARLEY DAVIDSON FLSTSE CVO SOFTAIL CONVERTIBLE
2010 HARLEY DAVIDSON FLHXSE CVO STREET GLIDE

Now Available @ TEC DISTRIBUTING! ABS TOP Brake Hoses Russell Top ABS Black Brake Hoses have Black Fittings are available in 3 Oversized Lengths. Fits 2008 Up ABS Touring Models
TEC #	Description
27375	Stock Plus 4"
27376	Stock Plus 8"
27377	Stock Plus 12"
27378	Stock Plus 15"

Now Available @ TEC DISTRIBUTING! NEW Russell Pro Swivel Black Brake Hoses
Russell Black Brake Hoses are One Piece, DOT Approved and Include Factory Crimped On Black Fittings. Russell Pro Swivel™ Brake Hose (Patent Pending) Russell Pro Swivel™ Brake Hoses feature our exclusive 360° swivel banjo system. The Pro Swivel™ banjo is incorporated at the caliper end of the hose assembly making rotation alignment hassle free. Using standard installation procedures simply route your hose use all stock mounting locations, attach the banjo at the master cylinder, you simply rotate the 90° banjo at the caliper to precise angel required and complete your installation. It's that easy. All Pro Swivel Russell Hoses at TEC 12mm-35 Degree Top and 10mm 90 Degree Bottom
TEC #	Description
27348	48" Length
27350	50" Length
27352	52" Length
27354	54" Length

BATTERY TENDER SOLAR PANELS ARE THE ONLY PANELS AVAILABLE WITH A BUILT-IN CHARGE CONTROLLER TO PREVENT OVERCHARGING Solar Panel with built-in Battery Tender®3-step automatic microprocessor controller. 100% portable battery charging and maintenance. Perfect for storage space without power access!		5-Watt	10-Watt	15-Watt
TEC #	Description
34175	5-Watt Solar Panel With Built in Controller
34176	10-Watt Solar Panel With Built in Controller
34177	15-Watt Solar Panel With Built in Controller

Now Available @ TEC DISTRIBUTING!

Click to see more Products from

MUC-OFF

Now Available @ TEC DISTRIBUTING! See PERMATEX Section for Details and Part Numbers Click Photos to Enlarge

Now Available at TEC! Black Brake Hoses
Precision Performance Black Brake Hoses are DOT and are available with Chrome Ends.

TEC Now Offers STA-BO

Swing Arm Stabilizers and Motor Mounts

STA-BO I

Click Photo to Enlarge

STA-BO II

Click Photo to Enlarge

STA-BO III

Click Photo to Enlarge

For a Complete Listing of STA-BO Pistons Click Below

STA-BO PRODUCTS

Click Photo to Enlarge

DUAL HEADER ONLY SYSTEM for 1999-2008 HARLEY-DAVIDSON FLHT, FLHX, FLTR AND FLHR models Use any Khrome Werks or Any other Bagger Muffler Set! Update your early Twin Cam bike and enjoy the late model look. This cleaner looking system reduces heat transmission to the rider and passenger by routing the exhaust under the frame instead of under the seat. Upgrade your 2009 model for a lighter system that offers more flow and makes more top end power than the factory system. Both systems feature 1¾” 16 gauge mandrel bent, interconnected headers and 220º full coverage heat shields. Front pipe crosses over to the left side and is securely mounted to the transmission oil pan. Crossover pipe is formed obround from 1 7/8” tubing for increased ground clearance and no cross sectional area loss. 99-08 system crossover is slightly lower than frame cross brace with the OEM kickstand as the lowest point. Systems features a hidden inter-connect for maximum top end horsepower, improved low end torque and sound damping. An independent dual pipe version was tested with less favorable results. Two 18mm O2 sensor ports and plugs and all mounting hardware included. Mufflers not included. Use any Khrome Werks or other bagger muffler set. Made in USA
Stock Header / Khrome Werks Slip ons	Khrome Werks Dual Header & Slip ons	Primary Side..No Burning Passenger

Click pictures to enlarge
TEC #	Description		Click pictures to enlarge
49975	Dual Header System 1999-2008		Mounting Photo with Stabilizer	Lower Cross Over Photo
49976	Dual Header System 2009-2011		Installed on S/S 124"	Lower Cross Over Photo t

NEW from Khrome Werks 1 ¼” FLHX/FLHT Handlebars Now available for 1996-2007 & 2008 up models with the electronic throttle control sensor unit. 1 ¼” diameter formed handlebars with 1” center mounting section and 1” grip mounts. Made in USA.			Check out our Handlebar Packages! Click for Handlebar Packages Click picture to enlarge 1 ¼” FLHX/FLHT APE HANGER In Stock @ TEC Click Here For KHROME WERKS Handlebar Specifications
TEC #	Description
49883	12” FAT APE Fit 2008-2010 FLHX & FLHT Batwing Fairings	300315
49888	12” FAT APE Fit 1996-2007 FLHX & FLHT Batwing Fairings	300310
49884	14” FAT APE Fits 2008-2010 FLHX & FLHT Batwing Fairings	300317
49889	14” FAT APE Fits 1996-2007 FLHX & FLHT Batwing Fairings	300312

New from Cartel Products Motorcycle Fork Oil
TEC #	Description
49857	Fork Oil 20 Weight 16oz
49858	Fork Oil 30 Weight 16oz

Now Available @ TEC DISTRIBUTING! 32 Tooth Stock Pulleys
TEC #	Description
84528	32T Pulley Fits '85-93 Big Twin (Includes Nut, Lock, Spacer & Seal)
84536	32T Pulley Fits '94-06 HD 5 Speed
84544	32T Pulley Fits '06 Dyna and '07 Big Twin up HD 6 Speeds
Now also available!
84543	31T Pulley Fits '06 Dyna and '07 Big Twin up HD 6 Speeds

NEW Late Model TEC Regulators In Stock (Black Unless Indicated) Excellent Stock Replacement Regulators.			Click Here for Complete Listing of TEC Regulators
TEC #	Description	Replaces #
34314	2006-2008 Touring Models	74505-06B
34316	2004-2005 Touring Models	74505-04
34318	2002-2003 Touring Models	74505-02

34340	2008-2010 Softail Models	74540-08
34342	2007 Only Softail Models	74540-07

34344	2009-2011 Sportster Models	74711-08
34346	2007-2008 Sportster Models	74546-07A
34348	2004-2006 Sportster Models	74523-04

34359	2004-2005 Dyna Models	74631-04
34360	2006-2007 Dyna Models	74631-06
34361	2008-2011 Dyna Models	74631-08

2006 fuel injected Dyna^® and all 2007-2010 models are equipped with dual narrow-band oxygen sensors and a Delphi^® ECM that supports closed loop air/fuel ratio (AFR) control based on feedback from the sensors. After the engine has warmed up, the ECM will maintain the AFR at 14.6 during idle and part throttle cruise. While the ECM is in closed loop operation, you cannot change the AFR at idle and part throttle cruise by adding fuel with the Twin Tuner. The ECM will correct for any attempt to add fuel in these operating ranges. For off-road racing where AFR changes are required at idle and part throttle, you can install our oxygen sensor eliminator kit P/N EGO-ELIM-KIT. This consists of a pair of oxygen sensor eliminators that plug into the wire harness in place of the original equipment oxygen sensors. The oxygen sensor eliminators contain a 1.0 megohm resistor that simulates a cold sensor condition and causes the ECM to remain in open loop operation. Once oxygen sensor eliminators are installed, you can make AFR changes throughout the entire engine operating range from idle to wide open throttle. Please note that P/N EGO-ELIM-KIT cannot be used on 2010 touring		Oxygen Sensor Eliminator Kit
TEC #	Description	Oxygen Sensor Eliminator Kit
34265	Oxygen Sensor Eliminator Kit

Zipper's MaxFlow Air Filters			Click picture to enlarge
TEC #	Description
31137	MaxFlow Air Filter Upgrade Kit with Studs Fits ’08-10 Touring Models with Throttle By Wire EFI equipped with factory Stage I A/C kit 5/8” deeper than the factory performance filter it is designed to replace.	117-298
31138	MaxFlow Replacement Air Filter Only for TBW Above Kit	117-130

31135	MaxFlow Air Filter Upgrade Kit with Studs Fits ’99-‘10 Big Twin Cable Operated Models with Carb or Delphi^® EFI equipped w/ factory Stage I A/C kit 5/8” deeper than the factory performance filter it is designed to replace.	117-296
31136	MaxFlow Replacement Air Filter Only for Above Cable Kit	117-114

TEC DISTRIBUTING Introduces the New 2008 up Touring Model ThunderMax Auto-Tune Module The Ultimate Engine Management System for Harley-Davidson® Motorcycles! The ThunderMax electronic fuel injection system was developed with complete versatility in mind. It is a fast and powerful processor, with many more points of adjustment, or resolution, than any of the other electronic fuel injection module add-ons			In Stock.
TEC #	Description
31147	Fits: 2008-2010 Touring Models Electronic Fly by Wire	309-362
31148	Fits: All Big Twin 2001-2007 & 2008-2010 Softail/ Dyna	309-360

TEC Cotton-Gauzed Washable Filters These filters can be easily cleaned and re-oiled for long lasting use. Proudly made in the U.S.A
TEC #	Description
69788	2008-2010 Dyna Models Replaces OEM #29191-08

TEC #	Description
69789	2008-2010 Screamin' Eagle Dyna Models Replaces OEM #29385-08

New From All Ball's 6 Speed Starter Clutches Fits 2006 Dyna and All 2007 up Big Twin			\
TEC #	Description
32223	Fits: 2006 Dyna & All Big Twins 2007 up	31663-07

New from Barnett

BLACK STEALTH CABLES

.New Stealth Series cables are the latest addition to the industry’s leading line of control cables. These ‘black on black’ cables feature a black vinyl casing with black chrome elbows and hardware for that “Stealth” look. Stainless steel wire rope is used with a nylon inner liner on throttle cables and all clutch cables come standard with Barnett’s exclusive High Efficiency inner wire which reduces lever effort and provides and ultra smooth cable action. Available for all 1987 & later Harley Davidson models. Genuine Barnett cables- Made in the USA since 1948.

CALL TEC FOR CABLES!

Click photo to enlarge for choice of Barnett Cables from TEC

New Magnetic Lifter Hangers Designed to simply remove cams while keeping the Tappets in the Lifter Blocks
TEC #	Description
89777	Magnetic Lifter Hanger 4 Pack	Click picture to enlarge	Sold as 4 Pack


TEC #	Description
97782	Single Fire 3 ohm Coil Shovel / Evo	Single Fire Coil Shovel / Evo	Single Fire Coil Twin Cam
97784	Single Fire Coil Twin Cam Rep 31655-99

TEC #	Description	Dual Fire Points Coils Pan, Shovel & Early Evo	Dual Fire Coil Shovel / Evo
97780	4.6 ohm for point ignition models 1965 thru 1979
97781	2.7 ohm for all models 1980 to present with electronic ignition (except FLHTCUI) NOT TWIN CAM

TEC #

Description

89757

Contoured O2 Oxygen Sensor Weld On Bung

Sold as Pair

(Excludes 2010 Touring Models)

New from WISECO

Electronic Fuel Injection Controllers

Wiseco’s new Electronic Fuel Injection Controllers are simple and easy to use. With the push of a button, you can easily adjust fuel flow for modifications such as high compression pistons, cams, intake, and exhaust to fine tune your bike. No dyno or computer needed! It gives you three basic zones of operation, similar to a carburetor. One zone sets your ‘pilot jet’ for idle and cruise. Another zone sets your ‘needle jet’ for acceleration, and a third zone sets your ‘main jet’ for heavy loading and wide open throttle.

This cost-effective fuel management controller is complete with built-in accelerator pump tuning capability.

These Units are Year and Bike Specific!

See Wiseco Section for Details and Part Numbers

• Plug N’ Play installation • Simple to use and understand

• Easy push button operation • No computer or dyno required

• Easy air/fuel ratio adjustment • Easily adjusts for modifications - intake, exhaust, cams, etc.

• Load based operation • Tuning capabilities superior to Alpha N type controllers

• 3 basic zones of operation • Similar to carburetors

• Uses OEM base code • Does not scramble base code

• Electronic ‘accelerator pump’ tuning capability • Provides instantaneous throttle response

K&N AirCharger^® High Performance Air Intakes K&N 63 Series kits are truly state-of-the-art. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the OEM air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The filters on these kits are washable and re-usable. Uses factory holes and mounting points. Estimated Horsepower Gain: 12.92 HP @ 4612 RPM
TEC #	Description
73438	Polished Air Charger High Performance Intake Kit fits 2008-2009 Touring Models Includes Polished Intake, K&N Filter, Gasket, and Hardware.
73436	Black Air Charger High Performance Intake Kit fits 2008-2009 Touring Models Includes Black Intake, K&N Filter, Gasket and Hardware.

New from Black Diamond Stock Replacement OEM Style Spring Kits- Stock Lift Knucklehead, Panhead, Shovelhead, & Ironhead		Ironhead Kit Shown Above Click photo to enlarge	Pan/Shovel Kit Shown Above Click photo to enlarge	Knucklehead Kit Shown Above Click photo to enlarge
TEC #	Description
86849	Knucklehead '36-47 .415" Lift/Steel Collars
86950	Pan/Shovel '48-83 .415" Lift/Steel Collars
86959	Ironhead '57-83 .400" Lift/Steel Collars

All Ball's Steering Head Bearing Kit

Kits includes upper and lower bearings with races & lower seals. Also includes tapered roller bearings

TEC #

Description

32194

Steering Head Bearing Kit

All Ball's Main Shaft Bearing Upgrade Kit

Special Main Shaft Bearing Upgrade Kit with double row ball bearing.

Fits: '90-06 Big Twin 5 Speed with Splined Shaft

TEC #

Description

32190

Main Shaft Bearing Upgrade Kit

All Ball's Inner Primary Mainshaft Bearing and Seal Kit.

Inner Primary Mainshaft Bearing & Seal Kit

Fits: '89-06 Big Twin 5 Speeds

TEC #

Description

71142

Main Shaft Bearing Upgrade Kit

K&N High-Flow Custom Intake Assembly Fits: 08-09 Touring Models
*With an added 6 Horsepower, K&N’s Custom Intake Assembly gives your Harley-Davidson life, in the fast lane…* Designed to fit neatly behind your Touring Model’s air filter cover. High-Flow Assembly is performance designed with Built in Breather System to provide a substantial increase in airflow, resulting in increased horsepower & torque
TEC #	Description
73545	Fits: 08-09 Harley Davidson TOURING Models

New Style Spyke Starters fit 2006 Dyna and All 2007 up Big Twins Spyke Inc is proud to announce the immediate availability of new 1.4 and 1.6kW Starter Motors for 2006 Dyna’s and all 2007-later T.C. Big Twins. Spyke engineered to produce 46% more cranking power than O.E. by using a precision wound high current rated armature. Starters will operate with the stock battery and cables and will clear the oil filler on Touring and Dyna models.		Click photo to enlarge
TEC #	Description
73607	1.4Kw Chrome Starter
73608	1.4Kw Black Starter

In Stock @ TEC Conversion Parts Kit Cam drives on any '99-2006 engine can be updated to new 2006 type roller chains with hydraulic chain tensioners. Instead of super powered spring adjusters, '06 Dyna roller cam chains use engine oil pressure to maintain chain tension. And '06 style conversion camshafts have large journal bearings on the sprocket ends. All 2007 96 inch engines and 2006 Dyna Glides use roller chain drives instead of silent chains. Cams made for '99-'06 engines will not fit '06 Dyna or '07 Twin 96" engines. 2006 Road Glides, Road Kings, Electra Glides and Softail models still run earlier silent chain drives. Cam grinds listed below are designed for use with stock hydraulic lifters.		Conversion Parts Kit Required for '99-2006 upgrade to 2006-'07 Roller Drives Chains
TEC #	Description
73575	Conversion Parts Kit
See Andrews Link in Left Column for Conversion Cams

NEW FROM TEC.... Extended Length Chrome Banjo Fitting for Aftermarket Forward Control Master Cylinders.
TEC #	Description
28108	Extended Banjo Fitting for Aftermarket Forward Control Master Cylinders.
		Click on picture to enlarge

Use of the word Harley Davidson, various model designations and Harley-Davidson numbers are for General Reference Only. There is no affiliation between TEC Distributing and Harley-Davidson motorcycle company. None of the parts on this website were manufactured by Harley-Davidson or under their supervision. Use of numbers and names are to show fitment only.

This Page is Always

Oxygen Sensor Eliminator Kit